Latest projects

Everything is in the title. Eight potentiometer, control the position of the playhead and duration of reading for each step of a pattern. Subtly imprecise, so definitely poetic!...
A waffle-model arch printed on the Ultimaker. 
A 3D-printed 4x4x4 matrix pen-holder.
After the first grid I made drew some comparisons to the comic la fièvre d'Urbicande I decided to make a second version more closely inspired by the grid from the comic. ...
Two smaller versions of Gridv2 made on the form1. The big one is 5x5x5cm, the small one 2x2x2cm
An old style frame with a computer. A slideshow controled by a Raspberry Pi.  Design a box, add holes : for the screen, for the ventilation, and to access some wire. Think...
A quick study model for an ongoing competition concerning the refurbishment of an old garage in Evere. The first version was based on the original plans which date back to 1935....
I decided to house my lunetta synth project in an old wooden organ case. The organ was broken beyond repair so I stripped it. To make a faceplate for the synth I wanted it to...
The fixtures of the lamps in our office are almost all partially or completely broken. As a result, most of the lamps are kept from falling to the ground by scotch tape.This clip...
Radio controlled vehicles again, but this time for a car.The objective is to create a CNC-milled custom battery holder.This is my first CNC project, and I used Galaad for the...
Some experiments in curved structural folding, based on a template by Dries Molemans.
Radio Controlled vehicles is part of my hobbies.I am flying multicopters (or at least I try to) with OpenPilot control boards, and I used the FabLab's 3D printer to make...
A small project for school: Home (interiors) in the sixties.This is a very simple project for school: the house frame is laser-cut  on 3mm MDF.A printed picture of the house...
A very simple project: laser-cut skyline templates on wallpaper to paint a room.The end-result: 
Here is a quick and stylish way to create some.Use the lasercutter and a piece of MDF or other materials.A button is made of extremely simple geometry. This one is greatly...

TABLE by

This model was created by our team of 3 students who study at ULB Architecture for structure courses. We tryed to do a table without glues and screws ! And the idea is to use the...
This model is a 'foldout' papercraft model of a project that is currently being designed at Urban Platform architects. 
A  first version for a wedding invitation in the form of a chapel door. 
This is a robotized microphone clamp. It can rotate along 2 axis.I design and print several parts :Here is a close up of the printed parts :And of course a video to show it moving...
2 Elastics go inside the system to hold the tube holding the microphone.The suspension is made in severals parts, otherwise some part aren't printable :The 2 parts can be...
The idea is to 3D scan the face of a person, then 3D print a portrait. To speed up the process, we keep the printed model minimal, cutting off the back of the head and the neck of...
The idea is to add a mechanic counter on the laser cutter that cannot be reset.There is a pin on the laser controller that can be used to find out if the laser is activated or not...
You should avoid to breath the soldering's fume with my Soldering Fume Extractor. It's convenient and easy to move.You need :2 fans : 12cm computer fana 12V powersome screw2...
PrieroMatic project in beta version. Description : Insert a coin, choose the sin you want to be forgiven, then you hear some sound and a voice telling you how to gain your...
Admin