Latest projects

The objective of this project was to make an 'ice radiator' based on a 3D printed model.The obvious solution is to make a silicone mold around a 3D object. I had not to much...
3D printed cube / grid structures for a school project: Urban disruption on 10 square meters.
A very simple Rasberry Pi Wooden/Acrylic based on the Pibow design.
Hi! Here is one of the instrument for the PloyBoy project. A common objets orchestra. As you probably  understood, it is a engine playing simultaneously with four recorders (...
It has been a long time I wanted to built monomes for my instruments.I never did it because illuminated button are definitly too expensive.After a few thinging and one or two...
A barrel organ blower I mad for my quad recorder sequencer. 
Although this print did not work out, I feel it's important to share it anyways considering it busted one of the resin tanks. Hopefully this post can help avoid similar problems...
For this version of the grid model I modified the openscad code used to generate the model to allow for the creation of a 'sequence' of growing cubes, in which the  'steps'...
A quick study model made with the Lasercutter for the ongoing competition 'Gaucheret', which Urban Platfrom (the office I work for) is participating in. The model is based of a 3D...
This mesh structure was modelled in sketchup and then printed on the Form1. 
Interview exclusif deThomas Van Bouwel,architecte chez UrbanPlatform, réalisé à iMAL le 4 mars 2014 par Thérèse Kanyange (stagiaire en Relations Publiques à iMAL).1. Comment...
the letter "Vav" (hebrew) fonts, divided into layers
engraving artificial leather and integrate to an old vest. 
Some projects made end of 2012 - beginning 2013 by people asking for a temporary access to the lab (commercial or not).Ledarabesk paper light by brXerland shown at ...
Work in progressTube-like effect with an hidden RGB Led controlled with Arduino and I2C protocol.An old radio.Steampunk accessories on the top to hide some wire and to stylized...
Lazer cutted box  containing :MultimeterVariable Solder / refractory stone / cleaning pad2 connector's boardsDC transformer from 1.5 to 12VArduino UNo + motor shieldThird...
This is a nice case for your Raspberry Pi. It use one of ther aspect of MDF : it's a little flexible.This is fully inspired of link need :MDF...
Chopper is an arduino based sequencer for rattle or any sound objet activated by shaking it. The panel an the mechanic parts are made with the laser cutter. This isn’t the most...
Everything is in the title. Eight potentiometer, control the position of the playhead and duration of reading for each step of a pattern. Subtly imprecise, so definitely poetic!...
A waffle-model arch printed on the Ultimaker. 
A 3D-printed 4x4x4 matrix pen-holder.
After the first grid I made drew some comparisons to the comic la fièvre d'Urbicande I decided to make a second version more closely inspired by the grid from the comic. ...
Two smaller versions of Gridv2 made on the form1. The big one is 5x5x5cm, the small one 2x2x2cm
Admin