Creative Fab 2021 Sint-Lukas Media & Information Design Campus Brussel
A 4 days workshop with 2 groups of students from Media & Information Design Campus Brussel, Sint-Lukas.
The workshop was given by Sigried Kellens, designer.
The students has learned how to use our differents machines in order to experiment with it and document their works.
Projects
Playing around with typography/iconography and 3D printing/lasercutting. Hereby creating fun tools to make analog works. ...
The idea behind this project was to make a modular sculpture composed of different 2D elements that could be fit together to make a 3D structure. I based my components off of a small sketch I made that had a combina...
A model of a modular shelving system. The system consists of a set of shelves that fit together in different ways. The shelves come in different sizes and shapes, which adds a playful element to the design...
This is a experiment with bringing basic 2d shapes to the 3d dimension through assembling lasercutted pieces. The sculpture is a downsized prototype with an endless array of different combinations. Nevertheless, its...
This lantern is a representation of my origin. I decided to work on this project because of the recent events that happened at the end of 2020. To be more concrete I am talking about the conflict in Artsakh, where ...
This implement is designed to hold a piece of paper in an upright position in order to present its content to the viewer. It is created out of simple shapes that give it a minimalist look and several different techn...
Onderzoeken van vormgeven van een data kluster / DATA kluis. hoe geef je een data kluster weer in 3D ? laser cutter om plastic te snijden op 15/15 power 100 snelheid om te graveren punten te makken d...
A vase for dry flowers...
A vase assembly made out of plexi material. The vase is meant for dried or dead flowers and cannot contain any liquids. ...
In de fablab ben ik opzoek gegaan naar manier om voor de blinde mensen een memory spel te maken. Van onder kunnen jullie mijn proces zien. ...
I'm making a comic with 5 characters and I wanted a customized business card holder.I wanted to make it look like one of my characters was holding businesscards, to make us more approachable and friendly. I also tho...
I wanted to try embossing with a 3D printed picture. I used an old press and different kinds of paper. First I made the paper wet and than placed it on the 3D-printed picture and passed it trough the press. It worke...
I used the technic of lasercutting to make a mold out of wood. I made a negatif, a positif and a mold for the mold. After placing the clay in the positif mold (that's inside the mold mold) you have to pu...
A multifunctional object for all your belongings.Two cirkels clamping a curved piece of plexi to form a container.Heigth 15cm, diameter 15cm.Made from plexi 3mm Currently occupied as ripe station for long fruits.Als...
