All tagged laser cutter

Here a list of suppliers (both online and "normal" shops) from which to buy material to use with the Laser Cutter.Plexiglass / AcrylicPragma-Plexi / Cheap in Brusselshttp://www.pragma-plexi.be Av. Paul Gilson, 3581620 Drogenbos02 377 01 56 VinkLocated in Belgium, doesn't have online ordering....
Un jeu de scrabble en langage binaire : toutes les pièces sont soit des 0, soit des 1 (elles valent respectivement 0 et 1 point).J'ai commencé par graver et découper les pièces à la découpeuse laser. Avec l'aide de Julien Maire, j'ai utilisé la fraiseuse pour creuser un plateau de jeu, le tout en...
Puzzle en forme de stégosaure. Le puzzle possède plusieurs couches. La couche superficielle représente la peau du dinosaure et fait notamment apparaître les plaques dorsales du stégosaure, tandis que la couche profonde fait évidemment apparaître le squelette du dino. Le tout est fabriqué en autant...
Boîte à mouchoirs. Permet de décorer une boîte de mouchoirs, ceux-ci sortant par la cheminée évoquant une volute de fumée. Est adaptée aux boîtes de mouchoirs de la marque b vendue au Colruyt.
 you are lucky (like me) exposé à la galerie C-O-M-P-O-S-I-T-E du 13/11/2015 au 16/01/2016‘Distributeur’ fait partie de you are lucky (like me). Cette oeuvre utilise des techniques avec la découpeuse laser et l'impression 3D.Premières ébauches.Schéma du principe de fonctionnement du monnayeur....
Simple 'Santa' game with laser cutted/engraved MDF plates and 3D printed gifts...
Test de la gravure laser sur pierre bleue:pour la face la plus large: découper une empreinte à mesure dans une panneau de mdf pour immobiliser la pierrepour les tranches: découper une empreinte légèrement plus étroite pour venir glisser la pierre et mettre la face à graver à niveau du...
Membres : Léa Galland, Marie-Lise Moetwil, Maelle Gillet, Sophie Michel Désigné Imal : Marie-Lise Moetwil Description : Sur les murs/murs de la communication, nous démarrons de la prise qui est un élément fréquent et lorsque qu’elle est utilisée, des câbles électriques...
This is not a piece of art, even not an invention, but a pretext to play a lot with electronics, programming, and laser cutting of course! This work is based on the work of petRockBlock exposed on his blog. The idea is to use a Raspberry Pi for emulating old arcade cabinet games – do you...
Informaticien de profession, mais surtout passionné par la technologie : électronique, programmation, mécanique, design éclairage, objets anciens, etc ...
School project: model scale of a Finish Sauna
School project on the Pyramid of Vision (Cone de Vision): Volumes and Slices.The modeling has been done with OpenSCAD.  
A very simple Rasberry Pi Wooden/Acrylic based on the Pibow design.
A quick study model made with the Lasercutter for the ongoing competition 'Gaucheret', which Urban Platfrom (the office I work for) is participating in. The model is based of a 3D model I made; the buildings were "unfolded" within sketchup using the 'flattery' plugin. The unfolded models were then...
Work in progressTube-like effect with an hidden RGB Led controlled with Arduino and I2C protocol.An old radio.Steampunk accessories on the top to hide some wire and to stylized the radio.A part of the 3D model for this project :The printing progress : Printed and then painted to have a better...
An old style frame with a computer. A slideshow controled by a Raspberry Pi.  Design a box, add holes : for the screen, for the ventilation, and to access some wire. Think also on the back plate to adjust the fixing for the screen. On most screen there is a Vesa norm, here it's 4 holes for 3mm...
Here's a simple way to fold paper.We have to make dot lines that we can cut later with the lazer cutter. First select the normal line  that you want to fold (here the diameter of the circle) Go to panel "style de contour" (Ctrl-Shift-F),  click on "Pointillés" and chose a pattern...
A quick study model for an ongoing competition concerning the refurbishment of an old garage in Evere. The first version was based on the original plans which date back to 1935. The second version was made after visiting the site, when we realized the concrete beams where actually concrete arches.
Some experiments in curved structural folding, based on a template by Dries Molemans.
Radio Controlled vehicles is part of my hobbies.I am flying multicopters (or at least I try to) with OpenPilot control boards, and I used the FabLab's 3D printer to make protection cases.In the beginning...For my first attempt, I just downloaded a ready-made case in STL format:  It does the...
This model is a 'foldout' papercraft model of a project that is currently being designed at Urban Platform architects. 
Inkscape is a popular Open Source vector graphics editor which can be used with the Cyborg laser cutter at iMAL.SmartCarve, the laser cutter software operating the Cyborg, is using the DXF file format for importing vector graphics and Inkscape allows us to easily export our SVG projects in DXF...
You should avoid to breath the soldering's fume with my Soldering Fume Extractor. It's convenient and easy to move.You need :2 fans : 12cm computer fana 12V powersome screw2 laser cutted sheetMy model look like thisYou can customize the laser cutted sheetyou need to align the fansyou can then...
[Work in progress]What does it do ?I developed that software to help people to select the most appropriate settings for the Cyborg LaserCutter. You specify the speed/power min/max values and the software generate a layer per speed/power combinaison. Each layer will contains a pattern to...
Admin