All tagged Mendel 90

The Mendel 90 is a creative common 3D Printer derived from the early RepRap. Most part are 3d printed or are laser cutted pieces. Every part could be repaired or upgraded.The building volume is 200*200*200 mm. It has a heating bed so you can print ABS and PLA, but for pratical reason the ABS is...
(only for ABS filament - use the Ultimaker for PLA printing)PrepressGet or create your 3D model. Export it to STL (if necessary). STL is a file format understandable by all 3D slicerSlicingFCH : 26/05/2014 : Slicing can be done with Cura as well. In that case, select the 'Prusa Mendel I3'...
Media Archaeology is a new science. It's not studying the history of cinematograph and gramophone, but how our perception of the world is transformed through the camera lens and the speaker. The audiovisual is like a soundtrack, a visual tracking shot moving in parallel to us; pictures and...
Glow in the dark!(Part of 'The Radiator' project)
The objective of this project was to make an 'ice radiator' based on a 3D printed model.The obvious solution is to make a silicone mold around a 3D object. I had not to much experience with that process and I didn't want to waste expensive silicone for testing; furthermore the size of the object...
Admin