All tagged 3d printer

(only for ABS filament - use the Ultimaker for PLA printing)PrepressGet or create your 3D model. Export it to STL (if necessary). STL is a file format understandable by all 3D slicerSlicingFCH : 26/05/2014 : Slicing can be done with Cura as well. In that case, select the 'Prusa Mendel I3'...
Impression 3D faite de la superposition de deux sculptures : Tête d' athlète (copie en marbre 2ème siècle av. JC., original en bronze de la Grèce classique. Met, New York) et Néfertiti (XVIIIéme Dynastie, Egypte. Neues Museum, Berlin).  L'impression tournera à 600 tours par minute de sorte...
Simple 'Santa' game with laser cutted/engraved MDF plates and 3D printed gifts...
Connaissez vous le TeteOcarré generator? Cette petite application flash développée par Zanorg et popularisée en son temps par Boulet permet de créer de petites caricatures carrées (on peut donc parler de carrécatures) de vous même, de vos proches ou de votre patron link...
Pour Pâques, j'ai décidé de ne rien acheter à mes enfants. Par contre, il me semblait pertinent de leur offrir quelque chose d'imaginé et de fabriqué au FabLab pour me donner un premier challenge: n'y connaissant encore rien il y a 2 mois, je trouvais l'idée positive. Le résultat: un chapeau...
School project on the Pyramid of Vision (Cone de Vision): Volumes and Slices.The modeling has been done with OpenSCAD.  
Glow in the dark!(Part of 'The Radiator' project)
The objective of this project was to make an 'ice radiator' based on a 3D printed model.The obvious solution is to make a silicone mold around a 3D object. I had not to much experience with that process and I didn't want to waste expensive silicone for testing; furthermore the size of the object...
3D printed cube / grid structures for a school project: Urban disruption on 10 square meters.
Interview exclusif deThomas Van Bouwel,architecte chez UrbanPlatform, réalisé à iMAL le 4 mars 2014 par Thérèse Kanyange (stagiaire en Relations Publiques à iMAL).1. Comment avez-vous été amené à connaître les nouvelles technologies de fabrication numérique ?C'est grâce à iMAL et à travers l'...
Spécialiste en design 3D depuis plus de 10 ans, je suis également peintre et sculpteur, J'ai étudié à l'Accadémie Royale des Beaux-Arts de Bruxelles mais je suis surtout autodidacte.
A 3D-printed 4x4x4 matrix pen-holder.
The fixtures of the lamps in our office are almost all partially or completely broken. As a result, most of the lamps are kept from falling to the ground by scotch tape.This clip is a first prototype for a piece that can be clicked onto the existing lightingfixture to hold the lamp in place. 
How to create spikes and rivets in PLA :link can be very usefull for join multiple 3D printed parts together. Much cheaper than M3 screws :-)
Radio Controlled vehicles is part of my hobbies.I am flying multicopters (or at least I try to) with OpenPilot control boards, and I used the FabLab's 3D printer to make protection cases.In the beginning...For my first attempt, I just downloaded a ready-made case in STL format:  It does the...
At IMAL every thursday night :-)Prezi about 3D Printing :  link about Laser cutting : link
The idea is to 3D scan the face of a person, then 3D print a portrait. To speed up the process, we keep the printed model minimal, cutting off the back of the head and the neck of the 3D model.The result is a bit reminiscent of carved cameos, although we use a frontal view instead of a side view.©...
 Our first Makerbot 3d printer (bought May 2011) is a: Thing-O-Matic with a MK6 extruder (0.5mm noozle - 2.88mm filament).The build platform was modified with an alumium plate for maintaining its flatness under heating(we don't use the Automatic Build Platform, not really usable).The platform...
Admin