This page is an archive of iMAL's wiki that operated between 2012 and 2022. It documented projects, residencies and workshops mostly taking place at iMAL's Fablab.

Older & newer Fablab projects are now found at fablab.imal.org

Latest resources

The Mendel 90 is a creative common 3D Printer derived from the early RepRap. Most part are 3d printed or are laser cutted pieces. Every part could be repaired or upgraded.The...
A cheap Digital signage system based on a Raspberry Pi : Screenly.Link to the open source edition, with installation and setup instruction.The system creates a managing webpage...
Files and notes of the "Introduction workshop to 3D modeling for 3D printing" given on February 25th and March 4th.Links:5 Mistakes to Avoid When Designing a 3D Model for 3D...
Each line = Quantity (- means broken) Fab.Reference Tec.Description Price- From Sorotec.de:Collets for Kress Spindle:1 SKR.0100 Collet for Kress Spindle motor 1,0mm: 14,95 EUR1...
The Form 1+ from Formlabs is an affordable stereolithography (SLA) 3D printer. It's using a special, photosensitive liquid resin that turns solid when hit by a laser. This...
This is a comparison of the same model printed with a Makerbot Replicator2 and a Form1. This model need to be the exact dimension. Parts like motors, cables and screw can...
The machine should be calibrated, the calibration data are saved in the machine. You can view them in GCode through:Machine -> OnBoard Preferences -> HomingCurrent working...
There should be a dedicated computer in the FabLab with all the softwares installed to operate the MakerBot. But if you ever needed to install everything on an another computer......
Here is the list of shared folders in the FabLab  Imac connected to the ultimaker :\\Imac-ultimaker\SharedFolder (from a linux/mac : smb://imac-ultimaker/SharedFolder )...
 Our first Makerbot 3d printer (bought May 2011) is a: Thing-O-Matic with a MK6 extruder (0.5mm noozle - 2.88mm filament).The build platform was modified with an alumium...
A brief introduction to content creation and edition on Wikimal.Your profileOn your first login, you will be asked to create a profile. First chose a name (the name that will be...